11. Output options#

Specifies the items written to the output files output and output.json. Physical quantities summed for each material ID are written to output.

Note

Revision history

Release 12.0.10

Support for output.json output through EMSOJson

Release 2023.11

Changed the output.json format through EMSOJson

Input settings#

11_Print_Output JSON key: output options object

MESH(11) Outputs detailed model mesh information (nodes, elements, and so on) for checking.

A(11) Outputs line integrals of the magnetic vector potential over all edges, for checking.

V(11) Outputs the electric scalar potential at all nodes, for checking.

B_INTEG(11) Output option for spatial magnetic flux density (T) due to magnetization and current.

X_SYMMETRY(11) Boundary condition setting for the x = 0 plane.

Y_SYMMETRY(11) Boundary condition setting for the y = 0 plane.

Z_SYMMETRY(11) Boundary condition setting for the z = 0 plane.

ROTATIONAL_SYMMETRY(11) Rotational symmetry order about the z-axis.

NO_POINTS(11) Number of calculation points specified by coordinates.

NO_MAT_IDS(11) Number of material IDs used for integration.

NO_COIL_SERIES(11) Number of COIL(17.1) entries used for integration.

INTEG_OPTION(11) Integration-point option.

INPUT_MESH(11) Option for B_integ_mesh.

HEAT(11) Output option for heat generation (W) for all conductors and each material.

MAG_FLUX(11) Output option for magnetic flux (Wb) linking a closed curve.

NO_LOOPS(11) Number of closed-curve loops to calculate.

READ_OPTION(11) Method for specifying closed curves.

NO_NODES(11) Number of nodes that form a loop.

NODE_IDS(11) Enter the node IDs traversed by the loop in sequence.

LINE_MAT_IDS(11) Line-element material IDs defining each loop.

SMAT_IDS(11) Surface-element material IDs for the cross section of linking flux.

CUR_FLUX(11) Output option for current (A) passing through a surface.

WRITE_OPTION(11) Output format for current passing through a surface.

NO_SURFACES(11) Surface elements used to calculate passing current.

FORCE_J_B(11) Output option for Lorentz force.

FORCE_NODAL(11) Output option for nodal force.

MAGNETIC_ENERGY(11) Output option for magnetic energy.

IRON_LOSS(11) Output option for iron loss.

GAP_B(11) Output option for magnetic flux density (T) in an air gap.

CHECK_PERMEANCE(11) Output option for permanent-magnet permeance.

Input format#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 6]
Type=I

Text format#

* MESH * A * V * B *B_INTEG * J_Q *
    I     I    I   I     I        I
* Q_AVERAGE * HEAT * MAG_FLUX *CUR_FLUX *
    I         I         I         I
* FORCE_J_B * FORCE_NODAL * MAGNETIC_ENERGY * IRON_LOSS *
    I            I                I              I

Important

B, J_Q, and Q_AVERAGE are not used.

JSON format#

JSON format from 2024.11#

"11_Print_Output" :
{
    "MESH" : I,
    "A" : I,
    "V" : I,
    "B_INTEG" : { },
    "HEAT" : I,
    "MAG_FLUX" : { },
    "CUR_FLUX" : { },
    "FORCE_J_B" : I,
    "FORCE_NODAL" : I,
    "MAGNETIC_ENERGY" : I,
    "IRON_LOSS" : I
},

Important

Because B, J_Q, and Q_AVERAGE are not used, they are omitted in JSON format.

Release 2024.11

In JSON format, these parameters use their default values when omitted. See the detailed descriptions for the default values.

Detailed description#

Specifies the items written to the output files output and output.json. Bold items are commonly used.

Text-format section

Fixed parameter set 1#

[row, col] = [1, 6]
Type=I

11_Print_Output#

JSON key:: Output options object

MESH#

MESH(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 1]

Model mesh information output option#
Output option	Description
0	Do not output
1	Outputs detailed model mesh information (nodes, elements, and so on), for checking.

A#

A(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 2]

Line-integral output option for magnetic vector potential over all edges#
Output option	Description
0 Default	Do not output
1	Outputs line integrals of the magnetic vector potential over all edges

V#

V(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 3]

Electric scalar potential output option for all nodes#
Output option	Description
0 Default	Do not output
1	Outputs the electric scalar potential at all nodes

B_INTEG#

B_INTEG(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 5]

Outputs spatial magnetic flux density (T) due to magnetization and current. Also supports two-dimensional translational-symmetry analysis. This is the integral of fields due to magnetization and current (eddy current, ELMCUR(17.2), SDEFCOIL(17.3), PHICOIL(17.4), DCCURR(17.5), SUFCUR(17.6), and COIL(17.1)). Additional data is required.

Also supports two-dimensional translational-symmetry analysis (GEOMETRY(12) = 1)

B_INTEG output option#
Output option	Description
0 Default	Do not output
1	Output with 6 significant digits
2	Output with 9 significant digits
3	Output with 16 significant digits

Equation: [EQ1]

Additional data#

Sets symmetry conditions equivalent to those of the FEM model for B_INTEG and COIL_FORCE(10.3).

Sets the calculation-point coordinates.

Text-format section

Type:: Fixed parameter set
Number of rows:: 2
Number of parameters:: 4, 4

Text format#

* SYMMETRY * ROTATION *
    I(-1,0,1)

Type:: Fixed parameter set
Number of rows:: 2
Number of parameters:: 4

Text format#

* IDS * NO_COIL_SERIES * INTEG_OPTION *
        I           I             I            I(0,1)

Example

Text format#

* X_SYMMETRY * Y_SYMMETRY * Z_SYMMETRY * ROTATIONAL_SYMMETRY *
    1            1            -1          1
* NO_POIMTS * NO_MATIDS * NO_COIL_SERIES * INTEG_OPTION * INPUT_MESH *
    3           1             1             0
* XP * YP * ZP *
0.01, 0.0, 0.0
0.01, 0.0, 0.01
0.01, 0.0, 0.02
* MAT_IDS *
    1
* COIL_SERIES *
    1

JSON format#

JSON format from 2024.11#

    "B_INTEG" :
    {
        "X_SYMMETRY" : I,
        "Y_SYMMETRY" : I,
        "Z_SYMMETRY" : I,
        "ROTATIONAL_SYMMETRY" : I,
        "B_INTEG_WIDE" : I,
        "INTEG_OPTION" : I,
        "INPUT_MESH" : I,
        "POINTS" :
        [
            [ E, E, E ]
        ],
        "MAT_IDS" : [ I ],
        "COIL_SERIES" : [ I ]
    }

Example

JSON format from 2024.11#

    "B_INTEG" :
    {
        "X_SYMMETRY" : 1,
        "Y_SYMMETRY" : 1,
        "Z_SYMMETRY" : -1,
        "ROTATIONAL_SYMMETRY" : 1,
        "B_INTEG_WIDE" : 2,
        "INTEG_OPTION" : 0,
        "INPUT_MESH" : 0,
        "POINTS" :
        [
            [ 0.01, 0.0, 0.0 ],
            [ 0.01, 0.0, 0.01 ],
            [ 0.01, 0.0, 0.02 ]
        ],
        "MAT_IDS" : [ 1 ],
        "COIL_SERIES" : [ 1 ]
    }

Important

Release 2024.11

In JSON format, these parameters use their default values when omitted. See the detailed descriptions for the default values.

X_SYMMETRY#

X_SYMMETRY(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 1]

Boundary condition setting for the x = 0 plane#
Output option	Description
0 Default	No symmetry with respect to the x = 0 plane.
1	The x = 0 plane is a symmetry plane with \(\pmb{B}_n = 0\).
-1	The x = 0 plane is a symmetry plane with \(\pmb{H}_t = 0\).

Y_SYMMETRY#

Y_SYMMETRY(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 2]

Boundary condition setting for the y = 0 plane#
Output option	Description
0 Default	No symmetry with respect to the y = 0 plane.
1	The y = 0 plane is a symmetry plane with \(\pmb{B}_n = 0\).
-1	The y = 0 plane is a symmetry plane with \(\pmb{H}_t = 0\).

Z_SYMMETRY#

Z_SYMMETRY(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 3]

Boundary condition setting for the z = 0 plane#
Output option	Description
0 Default	No symmetry with respect to the z = 0 plane.
1	The z = 0 plane is a symmetry plane with \(\pmb{B}_n = 0\).
-1	The z = 0 plane is a symmetry plane with \(\pmb{H}_t = 0\).

ROTATIONAL_SYMMETRY#

ROTATIONAL_SYMMETRY(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 4]

Data type:: Integer (I)
Description:: Rotational symmetry order about the z-axis. When the model is rotated about the z-axis by 2 \(\pi\) / ROTATION, the magnetic field coincides. For a negative value, the magnetic field reverses. Set this to 1 when there is no rotational symmetry.
Default value:: 1

Text-format section

NO_POINTS(11)#

NO_POINTS

Fixed parameter set 1#

[row, col] = [2, 1]
Type=I

Number of calculation points specified by XP, YP, and ZP coordinates.

NO_MAT_IDS(11)#

NO_MAT_IDS

Fixed parameter set 1#

[row, col] = [2, 2]
Type=I

Number of material IDs used for integration.

Default value:: 0

NO_COIL_SERIES(11)#

NO_COIL_SERIES

Fixed parameter set 1#

[row, col] = [2, 3]
Type=I

Number of external current and magnetic-field sources, COIL, used for integration.

Default value:: 0

POINTS#

POINTS(11)#

Data type:: Integer array (I)
Description:: Sets calculation-point coordinates as an array.

MAT_IDS#

MAT_IDS(11)#

Data type:: Integer array (I)
Description:: Sets the material IDs MAT_ID(16.1) used for integration as an array.

COIL_SERIES#

COIL_SERIES(11)#

Data type:: Integer array (I)
Description:: Sets the COIL(17.1) entries used for integration as an array.

B_INTEG_WIDE#

B_INTEG_WIDE(11)#

Data type:: Integer (I)
Description:: Specifies the output format for B_INTEG and COIL_FORCE(10.3).

B_INTEG output format#
Setting	Description
0 Default	Outputs in the standard format.
1	Outputs in the standard format (same as 0).
2	Outputs in the extended format.

INTEG_OPTION#

INTEG_OPTION(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [2, 4]

Integration-point option#
Output option	Description
0 Default	Integrates magnetization or current at element Gauss points.
1	Performs integration only at element centers.

Applied to magnetic-field calculations and COIL(17.1) electromagnetic-force calculations.

INPUT_MESH#

INPUT_MESH(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [2, 5]

Mesh file format#
Output option	Description
0 Default	Do not output
1	Uses node data in the B_integ_mesh file as calculation points for `B_INTEG`.

The mesh file format must be the same as INPUT_MESH_FILE(10.1). It can be used even when MESHLESS(10.1) is not 1. In a COIL(17.1)-only analysis, COIL geometry data is output to post_geom when MESH(10.3) = 1.

Caution

When MOTION(2) is used, calculation points are evaluated in the global (stationary) coordinate system.

Note

Revision history

Release 11.3.1

Supports two-dimensional translational-symmetry analysis (GEOMETRY(12) = 1) and MOTION(2).

HEAT#

HEAT(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [2, 2]

Heat-generation output option#
Output option	Description
0 Default	Do not output
1	Outputs heat generation (W) for all conductors and each material

Equation: [EQ2]

MAG_FLUX#

MAG_FLUX(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [2, 3]

Magnetic-flux output option for a closed curve#
Output option	Description
0 Default	Do not output
1	Outputs magnetic flux (Wb) linking a closed curve
2	For surface-element input, also outputs the average magnetic flux density obtained by dividing linking flux by area.

Equation: [EQ3]

Additional data#

Configures the closed-curve option for calculating linking flux.

Text-format section

Type:: Fixed parameter set
Number of rows:: 2 (3)
Number of parameters:: 2, (1), N

Node input

Text format#

*  NO_LOOPS *  READ_OPTION *
    I            0
* NO_NODES *
    I
* NODE_IDS *
I, ...

Line-element input

Text format#

*  NO_LOOPS *  READ_OPTION *
    I            1
* LINE_MAT_ID *
    I

Surface-element input

Text format#

*  NO_LOOPS *  READ_OPTION *
    I            2
* SMAT_ID *
    I

JSON format#

Node input

JSON format from 2024.11#

    "MAG_FLUX" :
    {
        "LOOP_NODES" :
        [
            [ I ]
        ]
    }

Line-element input

JSON format from 2024.11#

    "MAG_FLUX" :
    {
        "LOOP_EDGS" : [ I ]
    }

Surface-element input

JSON format from 2024.11#

    "MAG_FLUX" :
    {
        "SURFACES" : [ I ]
    }

Text-format section

NO_LOOPS(11)#

NO_LOOPS

Fixed parameter set 1#

[row, col] = [1, 1]
Type=I

Number of closed-curve loops to calculate. Specify this as an array in JSON format.

READ_OPTION#

READ_OPTION(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 2]

Method for specifying closed curves#
Output option	Description
0 Default	Node input
1	Line-element input
2	Surface-element input. Also outputs the average magnetic flux density obtained by dividing linking flux by area.

Text-format section

NO_NODES(11)#

Node input: NO_NODES

Fixed parameter set 1#

[row, col] = [2, 1]
Type=I

Number of nodes forming a loop

LOOP_NODES#

LOOP_NODES(11)#

Text-format section

NODE_IDS(11)#

Node input: NODE_IDS

Fixed parameter set 1#

[row, col] = [3, 1]

In text format, enter one value per line.

Data type:

Integer array (I)

Description:

Node IDs forming the closed curve.

Enter the node IDs traversed by the loop in sequence. Consecutive nodes must be at both ends of an edge.

A loop only needs to be closed considering symmetry. If it is closed within the analysis domain, its start and end nodes coincide.

LOOP_EDGS#

LOOP_EDGS(11)#

Text-format section

LINE_MAT_IDS(11)#

Edge-element input: LINE_MAT_IDS

Fixed parameter set 1#

[row, col] = [2, 1]

In text format, enter the values on one line.

Data type:

Integer array (I)

Description:

Edge-element IDs forming the closed curve.

Line-element material IDs defining each loop.

Element directions must be consistent. Magnetic flux is output as positive according to the right-hand rule with respect to the line-element orientation.

SURFACES#

SURFACES(11)#

Text-format section

SMAT_IDS(11)#

Surface-element input: SMAT_IDS

Fixed parameter set 1#

[row, col] = [2, 1]

In text format, enter one value per line.

Data type:

Integer array (I)

Description:

Surface-element material IDs for the cross section of linking flux.

Element directions must be consistent. Magnetic flux is output as positive according to the right-hand rule for the surface-element orientation.

CUR_FLUX#

CUR_FLUX(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [2, 3]

Current-through-surface output option#
Output option	Description
0 Default	Do not output
1	Outputs current (A) passing through a surface
2	In addition to current passing through the surface, outputs the normal current density on the surface to a file.

WRITE_OPTION#

WRITE_OPTION(11)#

Data type:: Integer (I)
Description:: Specifies the output format for CUR_FLUX. Used when CUR_FLUX is enabled.

WRITE_OPTION#
Setting	Description
0 Default	Do not output.
1	Outputs current (A) passing through a surface.
2	Outputs current (A) passing through a surface and the normal current density on the surface.

Additional data#

Text-format section

Type:: Fixed parameter set
Number of rows:: 2
Number of parameters:: 1, N

Text format#

* NO_SURFACES *
      I
* SMAT_IDS *
     I

JSON format#

JSON format from 2024.11#

    "CUR_FLUX" :
    {
        "WRITE_OPTION" : I,
        "SURFACES" : [ I ]
    }

Text-format section

NO_SURFACES(11)#

NO_SURFACES

Fixed parameter set 1#

[row, col] = [1, 1]
Type=I

Surface elements used to calculate passing current. Specify this as an array in JSON format.

SURFACES#

SURFACES(11)#

Text-format section

SMAT_IDS(11)#

SMAT_IDS

Fixed parameter set 1#

[row, col] = [2, 1]

In text format, enter one value per line.

Data type:

Integer (I)

Description:

Surface-element material IDs used to calculate current passing through a surface.

Surface elements forming the surface must be included in the input mesh data file pre_geom or rotor_mesh. They must coincide with faces of conductive volume elements. The surface-element orientation (right-hand rule) must point outward from the volume elements. Current flowing out of the volume elements is summed.

A negative surface-element material ID reverses the surface-element orientation. This is useful for two-dimensional analysis.

FORCE_J_B#

FORCE_J_B(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [3, 1]

Data type:: Integer (I)
Value:: 0, 1
Description:: Outputs Lorentz force \(\pmb{J} \times \pmb{B}\) for each material and the total.

FORCE_NODAL#

FORCE_NODAL(11)#

TYPE#

Text-format section

Fixed parameter set 1#

[row, col] = [3, 2]

Nodal-force output option#
Output option	Description
0 Default	Do not output
1	Outputs electromagnetic force based on nodal forces for each material and the total
2	Also outputs accumulated nodal force for regions including air
3	Outputs electromagnetic force for surface material IDs together with the surface-element mesh to surface_force. Also outputs the total force to output.

No additional data is required for TYPE = 1.

Equation: [EQ4]

JSON format#

JSON format from 2024.11#

    "FORCE_NODAL" :
    {
        "TYPE" : I
    }

Additional data: TYPE = 2#

Output of accumulated nodal force for regions including air

Text-format section

Type:: Fixed parameter set
Number of rows:: 1 + NO_FORCE_REGION*NO_MAT_IDS*MAT_IDS
Number of parameters:: 1, 1, 1,…

Text format#

* NO_FORCE_REGION *
      I
* NO_MAT_IDS *
     I
* MAT_IDS *
     I

JSON format#

JSON format from 2024.11#

    "FORCE_NODAL" : {
        "TYPE" : 2,
        "FORCE_REGIONS" : [ [ I ] ]
    }

Text-format section

NO_FORCE_REGION(11)#

NO_FORCE_REGION

Fixed parameter set 1#

[row, col] = [1, 1]

Number of regions for accumulated nodal force.

NO_MAT_IDS(11)#

NO_MAT_IDS

Fixed parameter set 1#

[row, col] = [1, 1]
Type=I

Number of material IDs included in the region.

MAT_IDS(11)#

MAT_IDS

Fixed parameter set 1#

[row, col] = [1, 1]
Type=I

Material IDs included in the region.

FORCE_REGIONS#

FORCE_REGIONS(11)#

Data type:: Integer array (I)
Description:: Material IDs included in the region. Specify this as a two-dimensional array [[]] in JSON format.

Additional data: TYPE = 3#

Output of electromagnetic force for surface material IDs

Text-format section

Type:: Fixed parameter set
Number of rows:: 1*NO_SMAT_IDS
Number of parameters:: 1, N

Text format#

* NO_SMAT_IDS *
      I
* SMAT_IDS *
     I

JSON format#

JSON format from 2024.11#

    "FORCE_NODAL" : {
        "TYPE" : 3,
        "SURFACE_FORCE" : [ I ]
    }

Text-format section

NO_SMAT_IDS(11)#

NO_FORCE_REGION

Fixed parameter set 1#

[row, col] = [1, 1]
Type=I

Number of regions for accumulated nodal force.

NO_MAT_IDS(11)#

NO_MAT_IDS

Fixed parameter set 1#

[row, col] = [1, 1]
Type=I

Number of material IDs included in the region.

MAT_IDS(11)#

MAT_IDS

Fixed parameter set 1#

[row, col] = [1, 1]
Type=I

Material IDs included in the region.

FORCE_REGIONS#

FORCE_REGIONS(11)#

Data type:: Integer array (I)
Description:: Material IDs included in the region. Specify this as a two-dimensional array [[]] in JSON format.

MAGNETIC_ENERGY#

MAGNETIC_ENERGY(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [3, 3]

Magnetic-energy output option#
Output option	Description
0 Default	Do not output
1	Outputs magnetic energy (J) for each region and the total

Equation: [EQ5]

IRON_LOSS#

IRON_LOSS(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [3, 4]

Outputs iron loss (W) for each region and the total. Input data for volume-element properties 16_1_3D_Element_Properties is required.

Iron-loss output option#
Output option	Description
0 Default	Do not output
1	Calculation method based on the maximum magnetic flux density. Input data for iron-loss calculation parameters is also required.
2	Calculation method based on the magnetic flux density waveform.
3	Hysteresis-loss calculation using PlayModel (`Play_Model(16.1)`).

The <HYSTERESIS module> is required.

Iron-loss output option#
Output option	Description
0 Default	Do not output
1	Outputs magnetic loss (W).

In JSON format, specify the above option in TYPE. Additional data is required for TYPE = 1.

JSON format from 2024.11#

    "IRON_LOSS" :
    {
        "TYPE" : I
    }

Additional data: IRON_LOSS = 1#

Calculation method based on maximum magnetic flux density (Steinmetz method)

Text-format section

Type:

Fixed parameter set

Number of rows:

1

Number of parameters:

4

Text format#

* FREQUENCY * ALPHA * BETA * GAMMA *
     E         E       E       E

JSON format#

JSON format from 2024.11#

    "IRON_LOSS" :
    {
        "TYPE" : 1,
        "FREQUENCY" : E,
        "ALPHA" : E,
        "BETA" : E,
        "GAMMA" : E
    }

FREQUENCY#

FREQUENCY(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 1]

Data type:: Real number (E)
Unit:: Hz
Description:: Fundamental frequency for iron-loss calculation

ALPHA#

ALPHA(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 2]

Data type:: Real number (E)
Description:: Frequency exponent \(\alpha\) for iron-loss calculation.
Default value:: 2

BETA#

BETA(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 3

Data type:: Real number (E)
Description:: Magnetic-flux-density exponent \(\beta\) for iron-loss calculation.
Default value:: 2

GAMMA#

GAMMA(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [1, 4]

Data type:: Real number (E)
Description:: Magnetic-flux-density exponent \(\gamma\) for hysteresis-loss calculation.
Default value:: 2

Equation: [EQ6]

GAP_B#

GAP_B(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [3, 5]

Air-gap magnetic-flux-density output option#
Output option	Description
0 Default	Do not output
1	Outputs magnetic flux density (T) in the air gap in a fixed JSON format

Note

Release_2026_09

Outputs correctly only for two-dimensional analysis.

CHECK_PERMEANCE#

CHECK_PERMEANCE(11)#

Text-format section

Fixed parameter set 1#

[row, col] = [3, 6]

Permanent-magnet permeance output option#
Output option	Description
0 Default	Do not output
1	Outputs permanent-magnet permeance

Note

Release_2026_09

CHECK_PERMEANCE uses CHECK_PERMEANCE in 17.7 Magnetization Vector Sources. The output file reports (magnet volume - volume of magnets judged demagnetized) / magnet volume for operating points below CHECK_PERMEANCE.

11. Output options

Contents

11. Output options#

Input settings#

Input format#

JSON format#

Detailed description#

MESH#

A#

V#

B_INTEG#

Additional data#

JSON format#

X_SYMMETRY#

Y_SYMMETRY#

Z_SYMMETRY#

ROTATIONAL_SYMMETRY#

POINTS#

MAT_IDS#

COIL_SERIES#

B_INTEG_WIDE#

INTEG_OPTION#

INPUT_MESH#

HEAT#

MAG_FLUX#

Additional data#

JSON format#

READ_OPTION#

LOOP_NODES#

LOOP_EDGS#

SURFACES#

CUR_FLUX#

WRITE_OPTION#

Additional data#

JSON format#

SURFACES#

FORCE_J_B#

FORCE_NODAL#

TYPE#

JSON format#

Additional data: TYPE = 2#

JSON format#

FORCE_REGIONS#

Additional data: TYPE = 3#

JSON format#

FORCE_REGIONS#

MAGNETIC_ENERGY#

IRON_LOSS#

Additional data: IRON_LOSS = 1#

JSON format#

FREQUENCY#

ALPHA#

BETA#

GAMMA#

GAP_B#

CHECK_PERMEANCE#