VI Output Files#
This chapter describes output files produced by EMSolution.
Output file names are fixed.
Post-processing mesh files and post-processing data files can be written in the following formats selected by POST_DATA_FILE(10.2).
- =1:
I-DEAS Universal format
- =2:
ATLAS format
- =3:
Nastran BDF format (for QVOL)
- =4:
KSWAD format
- =5:
FEMAP neutral format; changed from format 451 to format 1051
- =6:
CADAS format: post.cad
- =8:
HyperView ASCII format: post.hwascii
Output in =7: Abaqus format is not supported. However, for =8: HyperView ASCII format, the separately written post_geom mesh file is written in Nastran mesh format.
Mesh Files#
Written in the format specified by POST_DATA_FILE(10.2).
- post_geom:
Mesh data file for post-processing
- boundary_surface:
File for checking boundary conditions
- t_r_interface:
File for checking potential boundary surfaces
Distribution Data Files#
Distribution data files write element quantities when ELEM_OUT(10.2) =1 and nodal quantities when NODE_OUT(10.2) =1. When both are 1, both types of data are written. However, displacement disp is written only as a nodal quantity, even when ELEM_OUT(10.2) =1 and NODE_OUT(10.2) =0.
Written in the format specified by POST_DATA_FILE(10.2).
- magnetic:
Magnetic flux density distribution data file
- current:
Current density distribution data file
- surface_current:
Current density distribution data file for surface-impedance surfaces
- force:
Electromagnetic force distribution data file calculated by the nodal-force method
- surface_force:
Nodal electromagnetic force distribution data file calculated by the nodal-force method for surface elements of
FORCE_NODAL(10.3)- force_J_B:
Electromagnetic force distribution data file calculated by volume integration of the Lorentz force
- heat:
Heat-generation density and heat-generation distribution data file
- surface_heat:
Heat-generation density and heat-generation distribution data file for surface-impedance surfaces
- disp:
Displacement data file
- magnetization:
Magnetization distribution data file
- electric:
Electric potential and electric flux density, or electric field strength and current density, distribution data file
- iron_loss:
Iron-loss distribution data file
- COIL_force:
Electromagnetic force distribution data file calculated by volume integration of the Lorentz force for MESHED_COIL (
MESH(17.1.7))- COIL_current:
Data file for checking coil current in MESHED_COIL (
MESH(17.1.7))
Fixed-Format Files#
The following files are also described. They are always written in a fixed format, regardless of the format specified by POST_DATA_FILE(10.2).
- elem:
Element data file
- motion:
File that writes time, position (rotational position), velocity (angular velocity), and electromagnetic force (torque) as table data when
MOTION(17.1.6)is specified.- flux:
File that writes the normal component of magnetic flux density for surface elements when linked-flux calculation
FLUX(17.1.5)=2 is specified with a surface-element material-property ID.- initial_magnetization.dat:
File that writes magnetization and magnetization ratio when
MAGNETIZATION(10.3)=4.
output, output.json#
The output and output.json files are written as analysis-result summaries. The output file writes the summary in text format. The output.json file writes the summary in JSON format.